Sunday, December 27, 2009
Wednesday, December 23, 2009
Monday, December 21, 2009
So again I 100% recommend using a matte photo!! Otherwise you may not be happy with the results or you may even find that the product you are using doesn't work with glossy photo paper. Let me know if you have any questions in the comment area and I will be happy to respond there as well.
Sunday, December 20, 2009
Saturday, December 19, 2009
Basically anything you put on a page you can distress in some way. It's fun to play around with. Letters are probably the easiest embellishment to distress by either sanding, inking, or roughing up the edges. Just have fun with it and try different things.
Friday, December 18, 2009
There is so many ways to distress your stitching. Another way is to slightly tear apart or loosen some of the stitches. Ink a section of it to give it a stained look. Have fun with it! If you have a question feel free to leave it in the comments area and I will answer you back there as well. Thanks for looking!!
Thursday, December 17, 2009
This particular layout I used the same knife and used it on the green textured cardstock. I fluffed it up and gave it some really nice texture. As you can see this technique can be very thrashed looking or very pretty and neat. Either way it's very easy to do and helps give a layout that something extra.
Wednesday, December 16, 2009
Basically any ribbon, trim, or fiber can be distressed. Twine is really easy to fray up by lightly running it back and forth over some blades. Yarn can be unraveled and ribbon frayed. Lace can be torn and shredded. Just have fun with it.
The last couple of posts have some great examples of distressing trim as well.
Tuesday, December 15, 2009
When I dye my lace I will lay my lace down on my crafting mat and just run my ink down the lace letting drops fall as I go. The color will naturally spread out into your lace. I like to use a little more in some areas and a little less in others, so that it has a non uniformed look. Feel free to ask questions in the comment section and I will respond in the comments as well.
Monday, December 14, 2009
I even used bleach on the picture of this layout, but it a much different way. I will touch on photo distressing in a few days, so check back for the how to's on distressing your photo!!
Sunday, December 13, 2009
The nice thing about corrugated cardboard is you can get it for free on any box that gets delivered to your house or where ever. You can try doing different things to it without throwing away too much money. You can tear it, ink it, paint it, color it and the list goes on. Just have fun with it. I have noticed some ladies using it in their title work and it makes really cute letters. I haven't tried this yet, but I am wanting too. Feel free to ask questions by leaving them in my comment section and I will answer you there as well.
Saturday, December 12, 2009
One more quick and awesome way to sand is by crinkling up the paper you want to use into a wad. Then flatten it out again and take a sander to it. The wrinkles will turn white in color. You can ink it for added color or leave it plain. I chose to just ink around the edges of the blue circle below. This layout has around 11 techniques of distressing on it, so you will most likely be seeing it again in future how to's :).
I will tend to use a generic brand block sander or sand paper that I steal from my husband's shop :). I have come across this one from Tim Holtz in the scrapbook store as well.
Friday, December 11, 2009
I normally will use either a glitter mist or just ink over the mask using a blending tool like the one I have pictured below. Sometimes I use both mist and ink to get a more multicolored sparkly look. I will mist first and then ink over all of it using my blending tool. When you use the blending tool, don't stamp it down, but smoosh it around in a circular fashion to help blend nicely.
When I use inks over masks I will tend to spread my ink over a larger area of my paper. Then I will mist over it a little. It looks neat when you have some over spray of mist that gets over the masked area. Check out my "You" layout in my pre-12 Days of Christmas post, because it has a great example of this.
Thursday, December 10, 2009
This layout below has what I call nice and neat edge distressing. For the most part it has straight lines with roughness just on the edges.
A couple of tools you can use to get the above look are this Tim Holtz paper distresser or an exacto knife such as the Cutterbee. Some people use the blade on scissors as well, just as long as they are sharp enough. Now the Tim Holtz has directions included, but when you use and exacto knife or scissors you want to run the blade sideways along the edges. You will then begin to see the paper fray up a bit. The more you run the blade across the paper the more it will fray.
Below is a non uniform way to distress your edges. This layout below has been featured on my blog in the past for the flower, but it is also a great example of a very distressed edge. To do this I just run my scissors around the edge of my paper, cutting like you would wrapping paper, just let the scissors glide. If it tears a little, no big deal, it will only enhance the look more. You can decide to have more control with your lines like the photo mat or just go wild like the background paper.
Enhancing your edges isn't hard either. You can use inks and water. For example if you want an inked edge that looks like it's curling up, you can simply ink it then spray your paper with water around the edges and crinkle them up or roll them up. When it drys it looks really neat, because the ink runs just a little and the paper dries rolled and crinkled. I will generally use Ranger Distress Inks and Blending Tool when inking.
I did say several ways to distress your edges didn't I? Don't forget simply tearing your edges. That's a great way to create a neat look including a burned look. Make sure you are tearing the paper so that you can see the layers torn. Then I use Black or Dark Brown inks on the torn areas. Another way to get a burned look is by actually burning the edges lol. I've done that too, but I don't like the ashes that fall off the edges.
One more way to distress your edges just a little, but not actually all the way around. Just take scissors and make little 1/8" to 1/4" snips here and there around the edges of your paper. Then fray up the snips just a little. I did this around the background paper on this layout. I did make two large tears at the top and just cut some different pattern paper to stick behind it. I had to go back and actually correct this layout because I put the wrong year on it lol. That happens sometimes.
Wednesday, December 9, 2009
Wednesday, December 2, 2009
The black and white polka dot paper was severely distressed by crumpling it first then running over the top of it with a sanding tool. Then I tore and inked the edges on both the red and polka dot paper.
The title was a total accident. I used Bo Bunny chipboard letters in cream. I stuck the word 'him' on a white piece of scrap paper and then sanded the color out a bit and did a couple of swoops with some black soot ink. I liked it so much I just left it like it is on the scrap paper and stuck it on here.
The heart I smothered in glue and poured red glitter on that. I distress both the polka dot ribbon and the red ribbon, by shredding the edges of the polka dot ribbon and inking the red ribbon and shredding the ends for the break.
Thanks for stopping by and looking. I highly recommend trying out a canvas. They are a lot of fun.
Monday, November 30, 2009
Aren't these little hearts adorable!! They are tiny cloth hearts that I found on Ebay awhile back. They went perfect with this layout because they symbolize the kisses.
Tuesday, November 24, 2009
This photo is of Brooky praying. Being only 2, she usually says things like "Thank you for cheese, thank you for babies, thank you Jesus." It's so adorable to listen to her. I took this photo for my friend Katie's Etsy shop. I used it to create a banner for her and it turned out so cute.
Saturday, November 14, 2009
Want to know how it works? I did a quick and easy tutorial over at the Harlee Quinnz blog! Feel free to check it out and also take a look at the great tutorials from other DT Members as well. Harlee Quinnz Blog!
Sunday, November 1, 2009
Thanks for looking!!
Wednesday, October 21, 2009
That is pretty much it for my mixed media layout. I did do some stitching to the top with my sewing machine for added flare.